Published Papers

 1.   A. Bonefačić, D. Kunstelj, M. Stubićar and A.Tonejc, Dependence  of texture on
       processing conditions in extruded aluminum  wires, Trans. AIME 242 (1968) 1461.
 2.   A.Tonejc and A. Bonefačić, Enhanced solubility of iron in aluminum obtained by
       rapid quenching, J. Appl. Phys. 40 (1969)  419-420.
 3.   A.Tonejc and A. Bonefačić, Al-rich  metastable Al-Ti solid solutions, Scripta Metall.
       3 (1969) 145-147.
 4.   A.Tonejc  and A. Bonefačić, Metastable solubility of W in Al,  Trans. AIME 248
       (1969) 1664.
 5.   A. Kirin, A.Tonejc and A. Bonefačić, Change in the lattice parameter of aluminum
       under the influence of rapid quenching from  the liquid state, Scr. Metall. 3 (1969)
       943-946.
 6.   A. Tonejc and A. Bonefačić, Volume lattice distortions for binary  alloys of aluminium
       with transition metals Mn, Fe, Co and Ni,  Fizika 2 (1970) 81-86.
 7.   E. Babić, R. Krsnik, B. Leontić and A.Tonejc, Residual resistance measurements on
       supersaturated metastable alloys of iron in aluminium, Phys. Let. 32A (1970) 5-6.
 8.   E. Babić, R. Krsnik, B. Leontić and A.Tonejc, Resistometric  analysis of formation  of
       a new phase in supersaturated solid solution of iron in aluminium,  Phys.Stat. Sol.(a)

       3 (1970) 71-74.
 9.   A.Tonejc, D. Ročak and A. Bonefačić, Mechanical and structural  properties of Al-Ni
       alloys rapidly quenched from the melt, Acta  Met. 19 (1971) 311-316.
10.  A.Tonejc, X-ray study of the decomposition of metastable Al-rich Al-Fe solid
       solutions, Met. Trans. 2 (1971) 437-440.
11.  A.Tonejc, D. Ročak and A. Bonefačić, X-ray and microhardness  investigation of
       rapidly quenched Al-rich Al-Ni alloys, Fizika  2, Suppl. 2 (1971) 7.1.-7.6.
12.  A.Tonejc and A. Bonefačić, X-ray study of Al-rich Al-Fe alloys quenched from the
       melt, Fizika 2, Suppl. 2 (1971) 20.1.-20.6.
13.  A.Tonejc and A. Bonefačić, X-ray and metallographic study of  rapidly  quenched
       silver-lead alloys, Fizika 2, Suppl. 2 (1971)  32.1.-32.5.
14.  A.Tonejc, Phase transformation in Al-rich Al-W alloys rapidly  quenched from the
       melt, J. Mater. Sci. 7 (1972) 1272-1298.
15.  A.Tonejc, Annealing and difusion kinetics of transition metals Cr, Mn, Fe and Ni in
       aluminium, Phil. Mag. 27 (1973) 753-755.
16.  A. M. Tonejc, A.Tonejc and A. Bonefačić, Nonequilibrium phases  in Al-rich Al-Pt
       alloys, J. Mater. Sci. 9 (1974) 523-526.
17.  A.Tonejc, A. M. Tonejc and A. Bonefačić, Atomic volume expansions of Ag-
       52wt.%Cd alloy, Phys. Lett. 49A (1974) 145-146.
18.  A.Tonejc, Z. Ogorelec and B. Mestnik, X-ray investigation of  copper selenides
       Cu2-xSe (2.00>2-x>1.72), J. Appl. Cryst. 8 (1975) 375-379.
19.  A.Tonejc and J. P. Poirier, Mechanical equation of state and  superplastic materials,
       Scr. Met. 9 (1975) 555-557.
20.  A.Tonejc and J. P. Poirier, High temperature creep of equiaxed Cd-26.5at.%Zn
       eutectic in the superplastic regime, Proc. of 4th  Int. Conf. on the Strengh of Metals
       and Aloys, Vol. 1, Nancy  1976, 451-455.
21.  Z. Vučić, Z. Ogorelec and A.Tonejc, Critical phenomena at phase  transition to
       superionic state, Fizika, Suppl. 2 (1978) 77-83.
22.  S. Popović, A.Tonejc, B. Gržeta-Plenković, B. Čelustka, R. Trojko, Revised and new
       crystal data for indium selenides, J.  Appl. Cryst.12 (1979) 416-420.
23.  A.Tonejc, S. Popović and B. Gržeta-Plenković, Phases, lattice  parameters and
       thermal expansion of (GaxIn1-x)2Se3, 1>x>0,  between room temperature and melting
       point, J. Appl. Cryst. 13 (1980) 24-30.
24.  A.Tonejc, Phase diagram and some properties of Cu2-x Se  (2.01>2-x>1.75),
       J. Mater. Sci. 15 (1980) 3090-3094.
25.  A. M. Tonejc, A.Tonejc  and A. Bonefačić, Non-equilibrium phases  in rapidly
       quenched Al-rich Al-Pt alloys, Fizika 12, Suppl. 1 (1980) 117-121.
26.  A.Tonejc,  Phase transition from low-temperature normal phase to  high  temperature

       superionic phase in Cu2-xSe studied by X-ray  diffraction,  in "Recent  developments on

       condensed matter Physics",  Plenum Pub. Corp. (1981) Vol. 4,  337-342.
27.  A.Tonejc and A. M. Tonejc, X-ray diffraction study on  phase transition of Cu2Se,
       J. Solid State Chem. 39 (1981) 259-261.
28.  A. M. Tonejc, A.Tonejc and D. Kunstelj, Electron microscopic  determination of
       structural defects in liquid-quenched Ag-Sn  alloys and their dependence on internal
       residual stresses,  Metallography 17 (1984) 165-173.
29.  A. M. Tonejc, V. Kraševec, A.Tonejc, Microstructure of  different structural
       transformation in Co-10wt.%TaC induced by  rapid quenching,  in "Rapidly quenched
       metals", Elsvier Science Publishers B. V., Amsterdam, (1985) 875-878.
30.  A. M. Tonejc, A.Tonejc, V. Kraševec, Microstructure in Co-10wt.%TaC alloys
       induced by rapid quenching, Science of  Sintering 18 (1986) 79-85.
31.  A. M. Tonejc and A.Tonejc, Massive and martensitic phases in Cu-Ga alloys,
       Zeitschrift fur Kristalographie 185 (1988) 184.
32.  A.Tonejc, Z. Ogorelec and A. Bonefačić, Preparation of GaSb-InSb solid solutions
       by rapid quenching, J. Mater. Sci. Lett.  7 (1988) 1086-1087.
33.  A. Bonefačić, A.Tonejc and Z. Ogorelec, Enhanced solubility of   gallium in antimony

       produced by rapid quenching, Scripta Metall.  23 (1989) 1121-122.
34.  A.  M. Tonejc,  A.Tonejc and V. Kraševec,  On the microstructure  in rapidly quenched

      alloys with martensitic phases. Proceed. III   Balkan Congress on  Elect. Microscopy,

      Athens University, (1989)  259-260.
35.  A. Bonefačić, A.Tonejc and Z. Ogorelec, Solid solution of   gallium in antimony
       produced by rapid quenching, Fizika 21,  Suppl. 1 (1989) 303-306.
36.  A.  M.  Tonejc and  A.Tonejc,  Appearance  of  massive  and  martensitic phases  in

        CuGa alloys rapidly  quenched  from  the  melt, Fizika 21, Suppl. 1(1989) 167-170.
37.  A.Tonejc,  D. Dužević and A. M. Tonejc, Effects of ball milling  on pure Ga+Sb powder

       mixture;  oxidation,  glass formation  and  crystallization, Mater. Sci. Engng. A123 (1990)

       91-95.
38.  A. M. Tonejc and A.Tonejc, X-ray diffraction study of masive  and martensitic  phases

       in eutectoid Cu-Ga alloy rapidly quenched   from the melt, Fizika  23 (1991)  47-52.
39.  A.Tonejc,  A.  M.  Tonejc,  D.  Dužević,  Estimation  of  peak  temperature reached  by

       particles trapped among colliding balls in  the ball-milling process  using excessive oxidation

      of antimony,  Scripta Metall. et Mater. 25 (1991) 1111-1113.
40. A.  M.  Tonejc, A.Tonejc and V. Kraševec, Transmission electron  microscopy  study of 

      ball-milled  Ga-88at.%Sb  alloy,  Electron  Microscopy 92, Vol. II:  Material Science,

     (1992) 353.
41. C.  Kosanović,  J. Bronić, B. Subotić, M. Stubićar  and A.Tonejc , Mechanochemistry of
      Zeolites:  Part 1. Amorphization of zeolites  A, X and Synthetic Mordenite by Ball Milling,

      Zeolites 13 (1993) 261-268.
42. N. Stubićar,  B. Marković,  A.Tonejc and M. Stubićar, Crystal  growth of lead  flouride phases

      using the constant composition  method. III. Effect of pH and ionic strenght, J. Crystal Growth 

     130 (1993) 300-304.
43. A. M. Tonejc, D. Bagović and A.Tonejc, The lattice resolution in ball milled alumina (corundum)

      and in the Al-Zn, Periodicum Biologorum 95 (1993) 283-284.
44. A.Tonejc, C. Kosanović, A. M. Tonejc, M. Stubićar, B.Subotić and I. Šmit,  Equivalence of  ball

      milling and thermal treatment for phase transition in the Al2O3 system, Journal of Alloys and

      Compounds 204 (1994) L1-L3
45. A.Tonejc, M. Stubičar, A. M. Tonejc,  C. Kosanović, B. Subotić, I. Smit, Transformation of
      gama-AlOOH (boehmite)  and Al(OH)3 (gibbsite)  to alfa-Al2O3  (corundum) induced by high-energy

      ball milling,  J. Mater. Science Letters 13 (1994) 519-520.
46. A.Tonejc, A. M. Tonejc, D. Bagović and C. Kosanović, Comparison of the transformation
      sequence  from gama-AlOOH  (boehmite)  to   alfa-Al2O3 (corundum) induced by heating  and
      by ball milling, Materials Science and Engineeering A181/A182 (1994) 1227-1231.
47. M. Stubićar,  A.Tonejc, N. Stubićar,  K. Čosić, C. Kosanović and I. Jeren, Study  of high-energy

      ball milling and postannealing of B-W elemental powder mixture, Proceeding of 1994 Powder

      Metallurgy World Congress, Les editions de Physics, Vol. I (1994) 219-222.
48. C.  Kosanović, A. Čizmek, B. Subotić, I. Šmit, M. Stubićar  and A.Tonejc,  Mechanochemistry

      of Zeolites: Part 2, Change in Particulate Properties of  Zeolites  During Ball Milling,  Zeolites 15

      (1995) 247-252.
49. C.  Kosanović,  A. Čižmek, B. Subotić, I. Šmit , M. Stubićar  and  A.Tonejc,  Mechanochemistry

      of Zeolites:  Part 3, Amorphization of High-silica Zeolites (ZSM-5 and Silicalite) by Ball Milling,

      Zeolites 15 (1995) 51-57
50. C. Kosanović, A. Čizmek, B. Subotić, I. Šmit, M. Stubićar and  A.Tonejc,  Mechanochemistry of

      Zeolites. Part 4: Influence of cations on the rate of  amorphization  of zeolite A by ball milling, 

      Zeolites 15 (1995) 632-636 .
51. M. Stubićar,  A.Tonejc and N. Stubićar, X-ray diffraction study of W-B elemental  powder

      mixture after high-energy ball milling, Fizika A 4 (1995) 65-72
52. D. Dužević, M. Stubičar, O. Milat, A.Tonejc, R. Trojko, N. Stubičar, I. Anić and  M. Stanković,

      Study of the deamalgamation process in silver-tin-base amalgams, Fizika A43 (1995) 481-488.
53. D. Dužević, M. Stubičar, O. Milat, A.Tonejc, R. Trojko, N. Stubičar and D.  Krumes, An insight

      into dealmagation process in silver-tin-base amalgame, Proceedings of the 5 th international

      simposium  on new technologies, Porec 1995, edited by P. Balestrin et al. (EDZ , Zagreb, 1995)

     127-131.
54. A. M. Tonejc and A.Tonejc, Zirconia solid solutions ZrO2 - Y2O3 (CoO or Fe2O3)  obtained by

      mechanical alloying,  Mater. Sci. Forum 225-227 (1996) 497-502.
55. A. M. Tonejc, A.Tonejc, G. W.  Farrants and S. Hovmoler, Investigation of process  of 

      mechanical alloying of  ZrO2 and Y2O3 powders using HREM image processing ,  Proceedings

     of IX   Conference on Electron Microscopy of Solids, Krakow- Zakopane, Poland (1996) 367.
56. A. M. Tonejc, A.Tonejc, G. W. Farrants ans S. Hovmoller, Investigation of beginning of

      mechanical alloying of ZrO2 - Y2O3 powders using HREM image  processing , Proceedings of

       XI European Congres on Microscopy, Dublin , Ireland, Vol.2, M4 (1996) 11-12.
57. C. Kosanović, B. Subotić, I. Šmit, A. Čizmek, M. Stubičar and A.Tonejc, Study of
      structural in potassium-exchanged zeolite A induced by thermal and  mechanochemical

      treatments, Journal of Material Science 32 (1997) 73-78.
58. A.Sekulić, K. Furić, A.Tonejc, A.M.Tonejc and M. Stubičar, Determination of the  monoclinic,

      tetragonal and cubic phases in mechanically alloyed  ZrO2 - Y2O3 and ZrO2 - CoO powder

      mixtures by Raman spectroscopy, J. Mater. Sci. Letters  16 (1997)  260-262.
59. A. M. Tonejc,  A. Turković, M. Gotić, S. Musić, M. Vuković, R. Trojko and A.Tonejc, HREM,

      TEM and XRD observation of nanocrystalline phases in TiO2 obtained by sol-gel method,

      Materials Letters  31 (1997) 127-131.
60. A. Čižmek, B. Subotić, I. Šmit, A.Tonejc, R. Aiello, F. Crea, A. Nastro, Dissolution of high-silica

      zeolites in alkaline solutions II. Dissolution of 'activated' silicalite-1 and ZSM-5 with different

     aluminum content, Microporous Materials 8 (1997) 159-169.
61. A. M. Tonejc, A. Turković, A.Tonejc, X-ray diffraction and electron microscopy study of nanosize

      CeO2 as photoanode for dye-sensitized solar cell, Jour. of Computer- Assisted Microscopy

      9 (1997) 55-56.
62. A. Čižmek, B. Subotić, D. Kralj, V. Babić-Ivančić, A.Tonejc, Influenec of gel properties on the

      kinetics of kristallization and particulate properties of MFI-type zeolites. I. Influence of  time and

      temperature of gel ageing on the particulate properties of silicalite-1 microcrystals, Microporous

      Materials 12 ( 1997) 267-280.
63. N. Radić, A.Tonejc, M. Milun, P. Pervan, J. Ivkov, M. Stubičar, Preparation and  structure of

      AlW thin films, Thin Solid Films  317  (1998) 96-99.
64. D. Djurek, Z. Medunić, A.Tonejc,  M. Paljević,  Possible High Tc Superconductivity in  Ag

      Doped  PbO1+d(0.35<d<0.4), Croatica Chemica Acta  71 (1998) 81-86.
65. A. M. Tonejc, A.Tonejc G. W.  Farrants and S. Hovmoler, HREM image processing study

      occuring in mechanically alloyed ZrO2 -10mol.% Y2O3 powders, Mater. Sci.Forum 269-277

      (1998) 357-362.
66. N. Stubićar, I. Šmit, M. Stubićar, A.Tonejc, J. Schurtz and P. Zipper, An X-Ray diffraction study

      of the crystalline to amorphous phase change in cellulose during high-energy dry ball milling,

      Holtzfortschung 52 (1998) 455-458.
67. A. M. Tonejc, N. Ramšak, A. Prodan, A.Tonejc, A. Khalladi, S. Surinach, M. D. Baro,
      Correlation between microstructure and soft-magnetic properties of FeCuNbSiB based alloys

      Nanostructured Materials 12 (1999) 677-680.
68. T. Car, N. Radić, J. Ivkov, E. Babić and A.Tonejc, Crystallization kinetics of  amorphous 

      aluminum-tungsten thin films, Applied Physics A: Materials Science & Processing 68 (1999)

      69-73.
69. A. Khalladi, Z. Tong, S. Surinach, A. M. Tonejc, A.Tonejc, M. D. Baro, Nanocrystallization

      process in FeCuNbSiB based alloys, Materials  Science Forum 269-272 (1999) 95-100.
70. A. M. Tonejc, A.Tonejc, G. W.  Farrants and S. Hovmoler, Evidence on Mechanical Alloying in

      Ball Milled ZrO2-10mol%Y2O3 system based on HRTEM image processing analysis, Croatica

     Chemica Acta 72 (1999) 311-326.
71. A. M. Tonejc, I. Ðerđ, M. Gotić, M. Tuđa, S. Popović, A. Tonejc and S. Musić, TEM, HREM,

      SEM and X-ray  diffraction study of iron doped TiO2, Proceedings of  4th Multinational Congress

      on Electron  Microscopy, Veszprem, Hungary, (1999) 375-376.
72. Z. Ogorelec and A.Tonejc, Crystallization of glassy selenium during its plastic deformation,

      Materials Letters 42 (2000) 81-85.
73. I. Kokanović, B. Leontić, J. Lukatela, A.Tonejc, The effect of absorbed hydrogen on the chemical

      short-range order in Zr68Fe32 metallic glass,  Materials Science Forum 343-346 (2000) 744-750.
74. D. Djurek, Z. Medunić, A. Tonejc, M. Paljević, Posible RT superconductivity from
       Pb3CO5+Ag2O PACO, Physica C 341-348 (2000) 723-725.
75. A. M. Tonejc, I. Ðerđ, A. Tonejc, HRTEM image processing analysis on nanocrystalline iron-

      titanium powders, Proceedings of 12th European Congress on Electron Microscopy, Brno,

     Czech Republic, Vol II (2000) 303-304.
76. U.V. Desnica, O. Gamulin,  A. Tonejc, M. Ivanda, C.W. White, E. Sonder and R.A. Zuhr, CdS

     nanocrystals formed in SiO2 substrate by ion implantation, Mater. Sci. and Eng. C 15 (2001)

     105-107.
77. M. Stubićar, A. Tonejc, N. Radić, Microhardness Characterization of Al-W films, Vacuum 61

      (2001) 309-316.
78. D. Djurek, Z. Medunić, A. Tonejc, M. Paljević, PbCO32PbO+Ag2O and PbCO3PbO+Ag2O

     system: posible route for novel superconductors,  Physica C 351 (2001) 78-81.
79. A. Bilušić, S. Gradećak, A. Tonejc, A. M.  Tonejc, J.C. Lasajunias, A. Smontara, Transport
      properties of fullerite samples, Synthetic Metals 121 (2001) 1121-1122.
80. M. Stubićar, Z. Blažina, A. Tonejc, N. Stubićar, and D. Krumes, The effect of high energy ball

      milling on the crystal structure of GdNi5, PhysicaB: Condensed Matter 304 (2001) 304-308.
81. M. Stubićar, A. Tonejc and N. Stubićar, X-ray diffraction study of microstructural  evolutions of

     some MgO-TiO2 and MgO-Al2O3 powders, Proceed. 8th Seminar of the Inter. Federation for Heat

     Treatment and Surface Engineering, Cavtat, 12-14 Sept. 2001,  pp 459-466.
82. A. M. Tonejc, I. Ðerđ, A. Tonejc, Evidence from HRTEM image processing, XRDand EDS on

      nanocrystalline iron-doped titanium oxide powders, Mater. Sci. Eng. B85 (2001) 55-63.
83. A. M. Tonejc, I. Ðerđ, A. Tonejc, An analysis of evolution of grain size-lattice parameter  dependence

      in nanocrystalline TiO2 anatase, Mater. Sci. Eng.C 19 (2001) 85-89.
84. A. Smontara, A. M. Tonejc, S. Gradečak,  A. Tonejc, A. Bilušic, J.C. Lasajunias, Structural (XRD

      and HRTEM) investigations of fullerite C60 and C70 samples,  Mater. Sci. Eng. C 19 (2001)

     21-25.
85. A. M. Tonejc, I. Ðerð, A. Tonejc, Structure of ball milled ZrO2 and  ZrO2-10mol%Y2O3 powdes

      revealed by HRTEM image processing, Fizika 10 (2001) 177-190.
86. A. Tonejc, Crystallographic features of mechanically milled and alloyed nanosized and

      amorphous materials,  Acta Chim. Slov. 49 (2002) 1-28.
87. J.C. Lasajunias, M. Saint-Paul, A. Bilusić, A. Smontara, S. Gradečak, A. M. Tonejc, A.Tonejc,

      N. Kitamura, Acoustic and thermal  transport properties of hard carbon formed from C60

      fullerene, Phys. Rew. B 66 (2002) 1-12.
88. M. Metikoš-Hušković, N. Radić, Z. Grubač, A. Tonejc, The corrosion behavior of sputter-

      deposited aluminum-tungsten alloys, Electrochimica Acta 47 (2002) 2387-2393.
89. A. Smontara, A. Bilusić, J.C. Lasajunias, M. Saint-Paul, S. Gradećak, A. M. Tonejc,  A.Tonejc,

      N. Kimura, S. Bennigton, Thermal and elastic  properties of hard carbon, Streojarstvo 44 (2002)

      195-200.

90.  N. Radić, T. Car, A. Tonejc, J. Ivkov, M. Stubičar, M. Metikoš-Huković, Al-W Amorphous Thin
      Films, Proc. Inter. Workoshop of Thin Films 2003, Teheran, Iran,  World Scientific, London (2003)
      101-118.
91. J. Ivkov, N. Radić, A. Tonejc and T. Car, Structural relaxation of Al-W amorphous thin films,

      J. Non-Cryst. Solids 319  (2003) 232-240.
92. I. Djerdj, A. M. Tonejc, A. Tonejc, The calculation of the average grain size of nanocrystalline

      titania by means od electron microscopy and XRD, ‘’Proceedings of 6th multinational congress

     on microscopy’’, Eds. O. Milat, D. Ježek, Zagreb, Croatian Society for Electron Microscopy, 2003,

     221-222.
93. I. Kokanović, B. Leontić, J. Lukatela, A.Tonejc, The effect of thermal -relaxation on the short-

      range order in Zr80Co20 metallic glass,  Materials Science and Engineering A 375-377

     (2004) 688-692.
94. N. Radić, A. Tonejc, J. Ivkov, P. Dubček, S. Bernstorff, Z. Medunić, Sputter-deposited

      amorphous-like tungsten, Surface and Coatings Technology 180-181 (2004) 66-70.

95. N. Stubičar, A. Tonejc, M. Stubičar, Microstructural evolution of some MgO-TiO2 and

      MgO-Al2O3 powder mixtures during high-energy ball milling and post-annealing studied by

      X-ray diffraction, Alloys and Compounds 370 (2004) 296-301.
96. J. Ivkov, N. Radić,  A. Tonejc. Hall effect in Al-W thin films,  Solid State Communications
      129 (2004) 369-373.
97. I. Kokanović, A. Tonejc, Structure and crystallization of the partially crystalline Zr76Ni24 metallic glass,

      Materials Science and Engineering A 373 (2004) 26-32.

98. I. Kokanović, A. Tonejc, Influence of hydrogen dopant on the structure and crystallization of the
      partially crystalline Zr76Ni24 metallic glass, Journal of Alloys and Compounds 377 (2004) 141-149.
99. D. Djurek, Z. Medunić, M. Paljević, A. Tonejc, Colossal electric conductivity in Ag-defect Ag5Pb2O6
           Physica Status Solidi-Applied Research 201 (2004) 544-549.
100.T. Car, J. Ivkov, N. Radić, A. Tonejc, Resistivity models of phase transformation of amorphous

       Al78W22 thin films under isothermal and isochronal conditions, Applied Physics A: Materials and 
       processing  80 (2005) 1087-1092.

101.I. Kokanović, A. Tonejc, The effect of  the thermal relaxation of the short-range order in melt-quenched
      Zr-Co and Zr-Ni alloys, in "Properties and Application of Nanocrystalline Alloys from Amorphous
      Percursors" , NATO Science Series II Mathematics, Physics and Chemistry, Vol. 184, Kluwer, London
      (2005), pp 353-362.

102. I. Djerdj, A. M. Tonejc, A. Tonejc, N. Radić,  XRD line profile analysis of tungsten thin films, Vacuum
       80 (2005) 151-158.

103. I. Djerdj, A. M. Tonejc, A. Turković, M. Ivanda, A. Tonejc,  Evidence on the structural parameters of
        different nanocrystalline materials obtained by the refinement of SAED patterns, ‘’Proceedings of 7th
        Multinational Congress on microscopy’’, Eds. M. Čeh,  G. Dražić, S. Fidler, Slovene Society for
        Microscopy, 2005, 161-162.
104. I. Djerdj, I., A. M. Tonejc, A. Tonejc, Structural investigations of nanocrystalline TiO2 samples in
       Crystallography, in Electron Crystallography: Novel  Approaches for Structure Determination of
        Nanosized Materials, NATO Science Series II: Mathematics,  Physics and Chemistry, Vol. 211,
        Eds, T. Weirich, J. S. Labar, X. Zou, Springer (2006) 497-501.
105. I. Djerdj, A. M. Tonejc, A. Tonejc, N. Radić, On the applicability of different methods of XRD line profile
        analysis in estimating grain size and microstrain in tungsten thin films, Fizika A 15 (2006) 35-50.

106. A. Gajović, I. Djerdj, K. Furić, A. Tonejc, A.M. Tonejc, D. Su, R. Schlögel, R.: Synthesis of ZrTiO4 by solid
        state reaction in equimolar mixture of TiO2 and ZrO2,  J. Am. Ceram. Soc. 89 (2006) 2196-2205.
107. A. M. Tonejc, M.Ivanda and  A. Tonejc,   TEM and Raman scattering determination of

        nanocrystalline distributions  of CdSxSe1-x nanoparticles embedded in glass matrix, Proceedings  of 8th

        Multi national Congress on Microscopy, Prag, June 17 -21, 2007., Eds. J. Nebesarova and Pavel Hozak,

108. M. Metikoš-Hušković, Z. Grubač, N. Radić,  A. Tonejc, Sputter Deposited nanocrystalline Ni and Ni-W
        Films as Catalysts for Hydrogen Evolution, Journal of Molecular Catalysis A: Chemical 249 (2006) 172-180.

109. A. M. Tonejc, S.  Gradečak, A. Tonejc, M.  Bijelić, H. Posilović, V.  Bermanec, M.Tambe,

        Crystallographic phase and orientation analysis of GaAs nanowires by ESEM, EDS, TEM,  HRTEM

        and SAED, Proceedings of 14th European Microscopy Congress EMC 2008, Vol. 2, Materials

        Science / Springer, Berlin, 2008. 157-158.

110. A. M. Tonejc,  D. Medaković, S. Popović, M. Bijelić, Ž. Skoko, H. Posilović, A. Jaklin,  A. Tonejc,

         XRD, TEM, HRTEM and SAED investigation of the morphology and structure of the sea hare species  

        Aplysia punctata, Proc. Microscopy  Conference MC2009 Graz 2009, Life Sciences,  Volume 2,

        p.67-68;   Eds. M. A. Pabst and G. Zellnig.

111. M. Novak, I. Kokanović, D. Babić, M. Bačani, A. Tonejc, Variable-range-hopping exponents 1/2, 2/5 and

        1/4 in HCl-doped polyaniline pellets, Synthetic Metals  159 (2009) 649-653.

112. T. Car, N. Radić, P. Panjan, M. Čekada, A. Tonejc , Correlation between hardness and stresses in Al-(Nb,

        Mo, Ta) thin films, Thin Solid Films 517 (2009) 4605-4609.

113. A. M. Tonejc, S.  Gradečak, A. Tonejc, M.  Bijelić, M.Tambe,   Crystallographic phase and orientation

        analysis of GaAs nanowires by electron miceoscopy methods, Journal of  Advanced Microscopy Research

        5 (2010) 110-116.

114. A. Tonejc, Rentgenska difrakcija prezasićenih čvrstih otopina metalnih slitina na bazi aluminija dobivenih vrlo

        brzim kaljenjem iz taline u prvih 20 godina postojanja Instituta za fiziku Sveučilišta, u ''Kristalografija u

        Hrvatskoj'',  Zbornik radova znanstvenog skupa Kristalografija u  Hrvatskoj, 25.01.2012., Zagreb,
        urednik  S. Popović, Hrvatska akademija znanosti i  umjetnosti, (2013) 17-28.
115.  A. M. Tonejc, M. Ivanda, A.Tonejc, M. Bijelić, L. Mikac,  G. Štefanić, S.Musić, Evidence of Phaser

         transition in ZrO2-CuO nanoparticles revealed by HRTEM and SAED, Proceedings Microscopy

         Conference 2013, ed Rachel  Reinhard, Universitätsbibliothek - Publikationen der Universität Regensburg,

         2013, 385-386.

116. A. Tonejc, S. Popović, Ž. Skoko, Kratki osvrt na razvoj rendgenske difrakcije u polikristalu, u ''Suvremena   

        kristalografija u Hrvatskoj'', ed. Stanko Popović, HAZU,  2015, Zagreb, 57-67.

117. A. Tonejc, S. Popović,  Ž. Skoko, Suvremene difrakcijske metode u istraživanju polikristala, u ''Suvremena   

        kristalografija u Hrvatskoj'', ed. Stanko Popović, HAZU,  2015, Zagreb, 41-56.

118. S. Popović, A. Tonejc, Ž. Skoko, Contemporary Diffraction Methods in Study of   

         Polycrystals, Croat. Chem. Acta 88 (2015) 561-577

 

STRUČNI ČLANCI

1. A. Tonejc, Ultrabrzo kaljenje tekućih slitina, Matematičko fizički list 19 (1968/69) 148-150.

2. A. Tonejc, Određivanje fizikalnih konstanti u modernoj znanosti, Matematičko fizički list 24 (1973/74)

   145-150).

3. S. Popović, M. Mihaljević, A. Tonejc, D. Veža, O projektu STRUNA-fizika, Kemija u industriji 3-4

    (2013) 94.-98.

4. S. Popović, M. Mihaljević, A. Tonejc, D. Veža, Projekt STRUNA-fizika nije završen, Matematičko

     fizički list 63 (2012/13) 239-249.

KNJIGE

A. Popović, A. Tonejc, M. Mihaljević, Rječnik kristalografije, fizike kondenzirane materije i fizike

materijala (englesko-hrvatski; hrvatsko-engleski), ur. Antun Halonja, Institut za hrvatski

jezik i jezikoslovlje, (2014)

 

OCJENSKI RADAVI

Diplomski rad:   Laueova metoda rendgenske difrakcije, PMF, Zagreb, 1966

Magistarski rad: Istraživanja čvrstih otopina aluminijskih slitina,  PMF, Zagreb, 1969.

Doktorski rad:    Strukturna istraživanja nekih metastabilnih slitina brzo kaljenih iz tekućeg       

                           stanja, PMF, Zagreb, 1972.


Povratak na Prof. Antun Tonejc HOME PAGE
Povratak na Physics Department